Telescope Belt Conveyor

These combined telescopic forks can be used to place in storage and retrieve containers weighing up to 140 kg, single-deep or double-deep, in shelf compartments. Our positive-locking drive concept enables high dynamic values to be achieved. The telescopic table can also be used in combination with a belt conveyor to implement driven conveyance systems at the storage and retrieval location. The additional load capacity on the double-deep version ultimately ensures the exact positioning and alignment of the load.

Operation: Telescope belt conveyors are used in the high rise storage facility and in storage towers.

Highlights

  • Unique: belt moves out completely
  • Technology tried and tested a hundred times over
  • Low overall height and therefore optimum use of the storage volume
  • Optimum mechanical design
  • Lightweight design
  • Flexible: can be combined with any type of drive
  • Can be used with temperatures as low as -24°C
  • Maximum dynamics thanks to overlapping load movement

Contact us
Europe   USA   China

TELESCOPE BELT CONVEYORTELESCOPE BELT CONVEYORTELESCOPE BELT CONVEYORTELESCOPE BELT CONVEYOR
single-deepdouble-deep
Extending cross section (w*h)250x55 mm245x50 mm
Standard overall length850 mm1,300 mm
Aisle width950 mm1,400 mm
Extension (max.)360 mm1,200 mm
single-deepdouble-deep
Payload (max.) - 1 tine50 kg140 kg (2x70 kg)
single-deepdouble-deep
Acceleration unloaded4 m/s²3 m/s²
Speed unloaded1 m/s1.5 m/s

Operating scope
KT Stacker Cranes
Lift
Storage tower

Standard box sizes
300x400 mm, 600x400 mm, further box sizes possible

Single deep layout. The load in the rack is underriden 30%.
Double deep layout. The load in the rack is underriden 100% in single deep an 80% in double deep.